Dash Cam Installation Made Easy with These Simple Steps

Installing a dash cam can seem like a daunting task, especially when it comes to finding the perfect spot for your camera. I recently upgraded my front camera to the Garmin 55 and was eager to add a rear camera as well. But, I wasn't sure how to install it since the window on my crewmax truck rolls down.

After some trial and error, I finally found a solution that worked perfectly for me. The key phrase here is 'Dash installing'. Here's what worked for me:

First, I removed the pry tool from under the headliner and cut a 1-inch by 3-inch piece of metal sheeting. This was enough material for some trial and error to find the right spot for my camera mount.

I then used plastic prying tools to feel around underneath the headliner near the brake light, careful not to damage or remove any parts of the interior trim. This gave me a guide to center the dash cam perfectly.

Next, I measured and added blue painter's tape along the center line of the truck to help me center the camera. I then tucked the dash cam wire up along the interior trim near the rear seat belt and headliner, mated it to a 12-volt accessory plug, and plugged in the dash cam.

To start, I ran a wire from the add-a-fuse down behind the driver's side kick panel and along the front and rear door sills to the back wall. The Garmin 55 doesn't use a traditional suction cup, so I had to get creative with my installation.

I considered attaching a bracket to the rear seat headrests or drilling one into the interior trim around the rear seat belt. But, I ended up using a magnetic disc that adheres to the glass for my camera mount. This made installation much easier and more convenient.

With these simple steps, you too can install your dash cam with ease. Just remember to be patient and take your time to find the right spot for your camera. Happy installing!

Dash instaling